Sea Swirls Rotating Return Device

The Importance of Circulation in the Aquarium

Is designed to increase circulation, health, and life of the corals and fish in your tank. While in the past powerheads were our only means to provide this we have also learned of their drawbacks. Placement is just one of these, you know what i am talking about, once they have been placed it is only a matter of time before they lose their suction then your powerhead comes crashing down on your precious babies! Concealing a powerhead can also become quite the construction project and although it can be done, you will still end up with this "unnatural thing" in your tank not to mention you now will have an additional source of heat. Unidirectional flow is another issue.

No where in nature is a species subjected to a constant barrage of current. Another drawback is the maintenance involved. Powerheads being submersed in the water will have a tendency to clog and unless regular cleaning is on your schedule this obstruction can significally reduce your water motion.in nature, water currents carry life sustaining, "body building" nutrients essential to healthy growth. While at the same time "whisking" away excess mucus and detritus. Of course you will want to be aware that once you have created this "natural current", more emphasis should be placed on where you have selected to position some corals.

Water movement is not only important for reef aquaria but also for saltwater fish and freshwater fish aquariums. A good sweeping movement eliminates "dead spots" allowing debris and detritus to become suspended in the water column so your overflow or canister filter can remove them from your aquarium. In addition, good surface agitation aides in better gas exchange and due to a mirror effect of smooth water allows more light into your tank.

Sea Swirl Oscillator 1/2 inch

Specs:
Total height of 1/2" model - 4 1/4 Inches
Max Flow Rate of 1/2" Model - 550 GPH

Sea Swirl's Rotating Return Device is designed to increase circulation, health, and life of the corals and fish in your tank.

• Sea Swirl Units are not submersible.
• All Sea Swirl units now have adjustable inlet for easier positioning of incoming water line.
• All units supplied with a black FPT x FPT inlet filling for hard plumbing with PVC and a barb fitting is included for hose connections.
• Stronger backet assembly with 3/8" adjustment screws on 3/4" & 1" models
• Oscillates the return from your existing pump or canister filter 90 degrees every 60 seconds.
• 180 Degree oscillating capability on 1/2" and 3/4" models with optional "Y" fitting.
• Eliminates use of wave makers and power heads
• Greatly improves circulation and helps eliminate "Dead Spots"
• Unlike other units, operates with any pressure, nothing to hide and cannot clog.
• No more unidirectional flow.
• Natural wave motion sweeps away excess mucus and waste products.
• Improved circulation-stimulates growth and carries nutrients to corals and plants.
• Discourages growth of unwanted algae.
• Attaches to top frame of all standard glass aquariums (optional brackets available for acrylic tanks if needed).
• Supplied with adjustable black outlet fittings on 1/2" and 3/4" models (approximately 30 degrees).
• Outer oscillating pipe is machined for standard schedule 40 fittings.
• Maintenance free
• 9 foot electric cord
• 1 year warranty
• Made in the USA - U.S. Patent # 6,321,683

Seaswirl Oscillator 3/4 inch

Specs:
Total height of 3/4" model - 4 1/4 Inches
Max Flow Rate of 3/4" Model - 850 GPH

Sea Swirl's Rotating Return Device is designed to increase circulation, health, and life of the corals and fish in your tank.

• Sea Swirl Units are not submersible.
• All Sea Swirl units now have adjustable inlet for easier positioning of incoming water line.
• All units supplied with a black FPT x FPT inlet filling for hard plumbing with PVC and a barb fitting is included for hose connections.
• Stronger backet assembly with 3/8" adjustment screws on 3/4" & 1" models
• Oscillates the return from your existing pump or canister filter 90 degrees every 60 seconds.
• 180 Degree oscillating capability on 1/2" and 3/4" models with optional "Y" fitting.
• Eliminates use of wave makers and power heads
• Greatly improves circulation and helps eliminate "Dead Spots"
• Unlike other units, operates with any pressure, nothing to hide and cannot clog.
• No more unidirectional flow.
• Natural wave motion sweeps away excess mucus and waste products.
• Improved circulation-stimulates growth and carries nutrients to corals and plants.
• Discourages growth of unwanted algae.
• Attaches to top frame of all standard glass aquariums (optional brackets available for acrylic tanks if needed).
• Supplied with adjustable black outlet fittings on 1/2" and 3/4" models (approximately 30 degrees).
• Outer oscillating pipe is machined for standard schedule 40 fittings.
• Maintenance free
• 9 foot electric cord
• 1 year warranty
• Made in the USA - U.S. Patent # 6,321,683

Seaswirl Oscillator 1 inch

Specs:
Total height of 1" model - 5 1/4 Inches
Max Flow Rate of 1" Model - 1150 GPH

Sea Swirl's Rotating Return Device is designed to increase circulation, health, and life of the corals and fish in your tank.

• Sea Swirl Units are not submersible.
• All Sea Swirl units now have adjustable inlet for easier positioning of incoming water line.
• All units supplied with a black FPT x FPT inlet filling for hard plumbing with PVC and a barb fitting is included for hose connections.
• Stronger backet assembly with 3/8" adjustment screws on 3/4" & 1" models
• Oscillates the return from your existing pump or canister filter 90 degrees every 60 seconds.
• 180 Degree oscillating capability on 1/2" and 3/4" models with optional "Y" fitting.
• Eliminates use of wave makers and power heads
• Greatly improves circulation and helps eliminate "Dead Spots"
• Unlike other units, operates with any pressure, nothing to hide and cannot clog.
• No more unidirectional flow.
• Natural wave motion sweeps away excess mucus and waste products.
• Improved circulation-stimulates growth and carries nutrients to corals and plants.
• Discourages growth of unwanted algae.
• Attaches to top frame of all standard glass aquariums (optional brackets available for acrylic tanks if needed).
• Supplied with adjustable black outlet fittings on 1/2" and 3/4" models (approximately 30 degrees).
• Outer oscillating pipe is machined for standard schedule 40 fittings.
• Maintenance free
• 9 foot electric cord
• 1 year warranty
• Made in the USA - U.S. Patent # 6,321,683

Due to an over-whelming demand of product our current lead time is TWO Weeks from time order is placed until order is shipped. Thank You!